MIC OPTOELECTRONIC CO., LTD was established in Dec 2010, specializing in R&D, manufacturing and marketing of LED lighting products. We were nominated by the state as a National Hi-tech Enterprise, a Shenzhen Top-branded Enterprise and China Advanced Enterprise in Harmonious Labor Relations.

We design and manufacture LED products ranging from High Power LED Street Lights, High Power LED Tunnel Lights, LED Corn Lights, LED High Bay lights, LED Down Lights, LED Tube Lights to the other LED lights, which qualify us to be one of the largest manufacturer, supplier and exporter of LED and solar lights in China, as well as the leading provider in energy-saving solutions.

Ventajas de las farolas LED:

El ahorro de energía:

The efficiency of the LED light source has now reached 110-130lm/W, and there is still more room for development, with a theoretical peak of 250lm/W. The luminous efficiency of high-pressure sodium lamps increases with the increase in power.

Therefore, the overall luminous efficiency of LED street lamps is stronger than that of high-pressure sodium lamps; using high-power LED light sources with high-efficiency power supplies. The actual lighting effect has been tested compared to the current high-pressure sodium lamps used on the road with more than 60% energy saving. There is still a lot of room for technological progress. With the rapid improvement of LED efficiency, LED street lamps have shown great potential in energy saving.

Buena reproducción cromática:

The light color rendering of LED street lamps is much higher than that of high-pressure sodium lamps. The color rendering index of LEDs is high (70~80), and the color rendering index of high-pressure sodium lamps is only about 23. From the perspective of visual psychology, it can reach the same brightness. , The illuminance of LED street lights can be reduced by more than 20% on average than high-pressure sodium lights. And the road looks brighter, feels more comfortable, and the driver feels safer.

Long lifespan:

LED street lights have low light decay, less than 3% in one year, and still meet the road illumination requirements after 10 years of use, while high-pressure sodium lamps have larger decay, which drops by more than 30% each year. LED street lamps can be designed with lower power than high-pressure sodium lamps and have a longer lifespan.

Protección ecológica y medioambiental

El LED no contiene metales nocivos como mercurio y otros metales pesados ​​y no produce contaminantes. A diferencia de las lámparas de sodio de alta presión o las lámparas de halogenuros metálicos que dañan el medio ambiente cuando las desecha.

Bajo costo de mantenimiento

De acuerdo con el nivel técnico actual y los resultados de las pruebas, la fuente de luz LED de alta potencia se puede usar normalmente durante 10 años sin reemplazo, mientras que la lámpara de sodio de alta presión tradicional debe reemplazarse una vez al año y medio en promedio. El uso de fuentes de luz LED puede reducir en gran medida los costos de mantenimiento.

Temperatura de color opcional

LED can meet the color temperature needs for different occasions. Indoor and outdoor color temperature requirements are different. Home lighting is not the same as commercial lighting, for instance, some stores need alternative white LED lights to make their products stand out more. We can meet all the requirements on color to satisfy the appetite of the shoppers. The color temperature of the high-pressure sodium lamp is usually too low, which makes people feel depressed. The yellow light in summer may give people a feeling that it is too hot.

Alto factor de seguridad

LED street lights are low-voltage products. For solar LED street lights, only 12V is sufficient, and the voltage of LED street lights from mains is still 220V.

No estroboscópico

LED street lights can respond quickly, shorten the lighting time with no stroboscopic effect, which is suitable for protecting the human eye.