micled@mic-led.com

الرد في غضون 24 ساعة

+86 135 4334 3078

8:00 صباحًا ~ 22:00 مساءً

18w led street light bulb-01

18w LED Street Light Bulb

دقيقة. كمية الطلب: 100 قطعة

معلومات سريعة

منذ إنشاء علامتنا التجارية الخاصة MIC LED ، مع قدرة قوية على البحث والتطوير ، وفريق تقني محترف وخبرة غنية في الصناعة ، نطلق منتجات جديدة تتجاوز توقعات العملاء كل عام ، والتي تقود دائمًا اتجاه الصناعة.

السابق اقتبس الآن التالى
  • وصف
  • تخصيص

18w LED Street Light Bulb

An LED street light is an integrated light that uses LEDs as its light source. These are considered integrated lights because, in most cases, the luminaire and the fixture are not separate parts (except LEDGine-based luminaires). New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

تم إنشاء تصميمات مختلفة تدمج أنواعًا مختلفة من مصابيح LED في تركيبات الإضاءة. الاتجاه الحالي هو استخدام مصابيح LED عالية الطاقة 1 وات ، لكن بعض الشركات تستخدم مصابيح LED منخفضة الطاقة في منتجاتها ، بما في ذلك العديد من مصابيح LED منخفضة الطاقة المجمعة معًا لأداء نفس الغرض مثل مصباح LED واحد عالي الطاقة. يعتمد شكل مصباح الشارع LED على عدة عوامل ، بما في ذلك تكوين LED ، ومشتت الحرارة المستخدم مع مصابيح LED ، وتفضيل التصميم الجمالي.

تتشابه المشتتات الحرارية لأضواء الشوارع LED في التصميم مع المشتتات الحرارية المستخدمة في تبريد الإلكترونيات الأخرى مثل أجهزة الكمبيوتر. تميل أحواض الحرارة إلى الحصول على أكبر عدد ممكن من الأخاديد لتسهيل تدفق الهواء الساخن بعيدًا عن مصابيح LED. سوف تؤثر منطقة التبادل الحراري بشكل مباشر على العمر الافتراضي لمصابيح الشارع LED.

The lifespan of an LED street light is determined by its light output compared to its original design specification. Once its brightness decreases by 70 percent, an LED street light is considered to be at the end of its life.

Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the backside of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.

A drawback of LED focus panels is that most light is directed to the road and less light to the footpaths and other areas. This can be addressed by the use of specialized lens design and adjustable mounting spigots.

Energy Efficiency

The primary appeal of LED street lighting is energy efficiency compared to incandescent bulbs of the same luminance. Research continues to improve the efficiency of newer models. One such advance can be found in a street light product created by Lighting Science Group Corporation. One model of LED street lights produced by this group is up to 60 percent more efficient than previous models, lasts for 12 years, and allows for cost recovery through energy savings in only three years.

An LED street light based on a 901 milliwatt output LED can normally produce the same amount of (or higher) luminance as a traditional light but requires only half of the power consumption.

As the LED lighting fixtures normally produce less lumen/Watt illumination it is very crucial to have a well-distributed illumination pattern in order to do the same job as higher lumen/Watt conventional fixtures. So a good design of LED street lights is to point different LEDs in one fixture to different target points.

18w LED Street Light Bulb Advantages

1. Low power consumption and long and predictable lifetime.

2. The lifetime of LED street lights is usually 10 to 15 years, three times the life of current technologies adopted. LEDs also have a low maintenance cost.

3. Dimming

LEDs can be dimmed when less street lighting is needed, such as late nights and early mornings.

4. Small package size.

5. More accurate color rendering

The color rendering index is the ability of a light source to correctly reproduce the colors of the objects in comparison to an ideal light source.

6. Quick turn on and off

Unlike fluorescent bulbs, which take time to heat up once switched on, LEDs turn on instantly and do not have a problem restarting immediately after being turned off (hot ignition).

7. RoHS compliance

8. LEDs don't contain Hg/Pb and don't emit poisonous gases.

9. Less attractive to nocturnal insects

Insects are sensitive to the UV-blue and green region of the light spectrum. Nocturnal insects are attracted to the emission of UV-blue and green light from conventional light sources. White LEDs, however, emit light in a small peak in the blue range and smaller in the green range, so nocturnal insects are less attracted to such light sources.

10. Easy to design non-glare lighting equipment

Most LED street lights have a lens on the LED panel, which is designed to cast its light in a rectangular pattern, an advantage compared to traditional street lights, which typically have a reflector on the backside of a high-pressure sodium lamp. In this case, much of the luminance of the light is lost and produces light pollution in the air and surrounding environment. Such street lights can also cause glare for drivers and pedestrians.

11. ارتفاع ناتج الضوء حتى في درجات الحرارة المنخفضة.

لا يوجد محتوى.

اتصل بنا الآن ودعنا نساعدك في بدء عملك وتوسيعه!
نحن مهتمون دائمًا بالمشاريع الجديدة التعاونية ، كبيرة كانت أم صغيرة. أرسل لنا بريدًا إلكترونيًا وسنتواصل معك قريبًا ، متاحًا أو هاتفًا بين الساعة 8:00 صباحًا و 22:00 مساءً من الاثنين إلى السبت.
     


         
    MIC هي واحدة من أكبر الشركات المصنعة والموردين والمصدرين لإضاءة LED والأضواء الشمسية في الصين ، فضلاً عن كونها المزود الرائد في حلول توفير الطاقة.
    © حقوق الطبع والنشر 2010-2020: جميع الحقوق محفوظة. تصميم HQT